Cruiser Worx
Toyota Land Cruiser 200 Series, Lexus LX 570 207-2021 Floor Mats — Precision Fit EVA
Toyota Land Cruiser 200 Series, Lexus LX 570 207-2021 Floor Mats — Precision Fit EVA
Couldn't load pickup availability
Precision-Fit EVA Floor Mats – Toyota Land Cruiser 200 Series, Lexus LX 570
Custom-made EVA floor mats for the Land Cruiser 200 Series & Lexus LX 570 (2007–2021). Each mat is cut to your specific model, shaped to every footwell and contour for a precise, no-gap fit — trapping dirt, mud, sand and water and lifting out in seconds for a quick rinse.
Choose Your Coverage
- Front RHD Only — driver & passenger front mats, right-hand-drive layout ($375)
- Front LHD Only — driver & passenger front mats, left-hand-drive layout ($375)
- Front & Rear — complete front and rear set ($699)
- Trunk / Cargo Only — rear cargo-area mat ($280)
Choose Your Colours
- Mat Style: Gray Diamond (Large), Black Diamond (Large), Black Diamond (Small), Brown Diamond (Large), Beige Drop, Black Drop, Black Honeycomb
- Trim / Edge Colour: Black, Red, Grey, Orange, Dark Blue/Navy, Yellow, Light Blue/Sky Blue, Light Green, Pink
Features
- Precision-cut to your exact model for a true factory fit
- Lightweight, durable EVA — flexible, 100% waterproof and easy to clean
- Raised textured surface traps debris and liquids
- Secured by the original clips / Velcro for a stable, no-slip fit
- Designed and made in Canada · 1-year warranty
Fitment
Fits the Land Cruiser 200 Series & Lexus LX 570 (2007–2021). If you are unsure which set is right for your vehicle, contact us before ordering and we’ll confirm the correct fit.
The colour fan shown displays the available mat styles and trim colours. Choose your drive side (RHD or LHD) so the front pedal cut-outs line up correctly.
Made to Order
Each set is custom made to your colour choice. Please allow 3–5 business days to ship.
Images are representative only
Installation Instructions
Reshaping after shipping
Your mats may arrive slightly misshapen from packaging and shipping. Gently warm the affected areas with a hair dryer, keeping it moving to avoid overheating, then shape the mat to fit the floor area.
Installing anti-slip mounts
Your mats may include user-installed anti-slip hooks or round screw-in mounts. Follow the instructions below for the fittings supplied with your mats.
Twist-lock tabs and hook bases
- Position the mat exactly where you want it in your vehicle.
- Apply light pressure around each black locking tab, then carefully turn the tab 90 degrees to release it from the mat.
- Lift the mat out carefully, leaving the mounting hooks in position.
- Outline the perimeter of each hook base with painter’s tape to mark its position.
- Place the hook base at the rear centre of its taped outline. With controlled downward pressure, push the hook through the carpet.
- Slide the hook base forward, towards the engine, until it sits correctly within the taped outline.
- Remove the tape, refit the mat and secure the locking tabs.
Round pin / screw-in mounts
- Position the mat correctly. Place a piece of painter’s tape beneath each mounting point, then press the point through the tape to mark its location.
- Unsnap the pointed screw mount from the mat.
- At the marked position, apply controlled downward pressure to pierce the carpet, then screw the mount in.
- Before the mount is fully seated, carefully remove the tape without moving the mount. Back the screw out slightly if needed to release the tape, then tighten it fully.
- Refit the mat and press the round fitting onto the mount until it clicks into place like a button.
Before driving: Check that the mat is securely attached and cannot interfere with the accelerator, brake or clutch pedals. Check beneath the carpet before piercing it, and do not force a fitting into an area where it could damage wiring or other components.
Cleaning and care
Clean with mild soap and water. For ground-in dirt, use a bristle brush to gently scrub the affected area.
Do not use a pressure washer, as it may damage the mat’s finish.
Share
