1HD-FT / 1HD-FTE Injector Washer & Seal Kit (6 injectors) — Land Cruiser 80/100

Genuine Toyota install kit for refitting all six injectors on the 24-valve 1HD-FT (HDJ80/81) and 1HD-FTE (HDJ100).

These engines seal each injector in four places: the nozzle seat at the tip, an O-ring on the injector body, the nozzle holder seal where the injector passes through the head cover, and the leakage-pipe gasket. All four are here, six of each, plus the single gasket for the leak-off pipe end.

What’s in the kit

• 6 × Nozzle seat — Toyota 11176-17020
• 6 × O-ring, injector body — Toyota 96721-24015
• 6 × Nozzle holder seal — Toyota 23681-17010
• 6 × Leakage pipe gasket assembly (supersedes 90904-30005) — Toyota 90904-30006
• 1 × Leak-off pipe end gasket — Toyota 90430-13002

Workshop notes

Lightly oil the body O-ring and the nozzle holder seal before fitting; never reuse the leakage-pipe gasket assembly. The nozzle holder seals are a common oil leak, so replace them whenever the injectors are out. On the 1HD-FTE, disconnect the battery before removing the injector harness. Follow factory pressure testing procedure before installing valve cover.

Fitment

Toyota Land Cruiser HDJ80 / HDJ81 (1HD-FT, 1995–1998) and HDJ100 / HDJ101 (1HD-FTE, 1998–2007).

Fitment described to the best of our knowledge, Errors & Omissions Excepted (E&OE) — please verify part numbers against your engine / chassis before ordering.