Front Wheel Bearing Kit — Land Cruiser 40 / 60 / 70 / 80 / 105 Series Solid Axle (Per Side or Pair)

Everything you need to service one front hub on a solid-axle Land Cruiser: inner and outer tapered bearings with races, the hub oil seal, the drive flange gasket and new spindle hardware. Choose per side, or a pair to do both hubs.

What's in the kit (per side)

• 1 × Inner wheel bearing and race, Koyo — 90368-49084
• 1 × Outer wheel bearing and race, Koyo — 90368-45087
• 1 × Front hub oil seal — 90311-62001
• 1 × Drive flange gasket — 43422-60040
• 2 × Spindle nut (adjusting and lock nut) — 43521-60011
• 1 × Star lock washer — 90215-42025
• 1 × Claw (thrust) washer — 90214-42030

The pair option includes two of everything.

Two ways to buy

• Toyota OEM: Koyo bearings (Koyo is Toyota's original-equipment bearing maker) with a Genuine Toyota hub seal, gasket, nuts and washers.
• Cruiser Worx Value: the same Koyo bearings, Genuine Toyota gasket and washers, with a quality aftermarket hub seal and spindle nuts.

Fits

Solid front axle Land Cruisers with tapered hub bearings: 40 and 60 Series with front disc brakes, 70 Series (including Prado LJ78 / KZJ78), 80 Series and Lexus LX450, and 105 Series (FZJ105 / HZJ105).

Does not fit the 100 Series, LX470 or Prado 90 / 120 / 150 (independent front suspension). Late 70 Series with ABS hubs (08/2012-on) use a different kit. Check your VIN if unsure.

Good to know

• Pack the bearings with high-temperature wheel bearing grease and set preload to the factory spec.
• A 54 mm hub nut socket is needed for the spindle nuts.
• Doing the knuckles too? See our swivel hub / knuckle kits.